littleblue controller
Scientific Electronic made easy…
The littleblue controller is the multifunctional and smart controller from SciTronix.
On the Android-based system different areas of applications can be controlled, regulated and observed. Due to the more littleblue extensions from SciTronix your system can be customized according to your needs.
littleblue controller has a 5,5″ wide touch-display, where the needed functions can be programed and observed. Depending on your wish necessary parameters will be measured and appropriate functions will be triggered via the power-plugs or the 1-10V interface. The programing is simple and intuitiv.
Available extensions communicate directly via USB with littleblue controller.
There are two more interesting extenstions rounding off the littleblue controller. The Power-Bar, which has six independant switchable plugs, as well the X-Bar, which has the same plugs, as well different very usefully conenctions for measuring sensors. These sensors, for Redox, Conductivity, pH and O2, as well also for level sensors are sending their measurements directly to the littleblue controller, where your defined and programed functions and actions are triggered.
littleblue is easy to use comfortable Internet connected smart and forward looking exact
The X-Bar will be connected by USB to littleblue. Following connections littleblue X-Bar offers:
- 6x power plug socket
- every socket is independantly controllable
- every socket will be switched by a single relais
- every socket measured the current with a HAL-sensor
- the switch state will be highlighted by LEDs
- in case of power-loss special defined emergency-switch states will be switched
- 2x 1-10V connections
- 1x Redox connections
- 1x Conductivity connection
- 1x O2 connection
- 2x pH conenctions
- 3x level sensor connections
*usual BNC-measurement sensors can be used
The Power-Bar will be connected by USB to littleblue. Following connections littleblue Power-Bar offers:
- 6x power plug socket
- every socket is independantly controllable
- every socket will be switched by a single relais
- every socket measured the current with a HAL-sensor
- the switch state will be highlighted by LEDs
- in case of power-loss special defined emergency-switch states will be switched
The littleblue starter set includes:
- littleblue controller
- X-Bar
- Temperature sensor
- hanging kits
The littleblue Maxima Set includes:
- littleblue controller
- X-Bar
- Power bar
- Temperature sensor
- hanging kits
This post is also available in: German
